![Very Happy :D](images/smilies/ugly_d.gif.pagespeed.ce.FMB1HCwuUF.gif)
Startup of server PSU "N7K-AC-6.0KW"
Moderatoren: MaxZ, ebastler, SeriousD
-
- Beiträge: 15
- Registriert: Di 23. Jul 2024, 18:22
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 2 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
Now i came with idea that i could try connecting random digital pins to groud (not short, like 100ohm resistance to prevent short circuit currents) idk if its good idea but maybe i could find that pin faster... or it can be 2 pins at the same time and i will never find it ![Very Happy :D](images/smilies/ugly_d.gif.pagespeed.ce.FMB1HCwuUF.gif)
![Very Happy :D](images/smilies/ugly_d.gif.pagespeed.ce.FMB1HCwuUF.gif)
-
- Beiträge: 15
- Registriert: Di 23. Jul 2024, 18:22
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 2 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
Yes, sorry Thunderbolt... i somehow completely missed your comment about your testing method..
I will try tomorow and i write update here
I will try tomorow and i write update here
-
- Beiträge: 3290
- Registriert: Di 30. Jun 2015, 20:45
- Spezialgebiet: Informatik
- Wohnort: Nähe Heidelberg
- Hat sich bedankt: 379 Mal
- Danksagung erhalten: 221 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
There is some great information on the rcgroups-forum:
Overview Server-PSUs:
======================
https://www.rcgroups.com/forums/showthr ... r-Supplies
general procedure to find PSon and PSkill:
==============================================
https://www.rcgroups.com/forums/showthr ... r-Supplies
https://www.rcgroups.com/forums/showpost.php?
I had some success with the procedures described here. You can measure resistance between ground and each PIN on the backside and conclude its possible function. Its still guessing so you must be cautious and use at least 500 ohm or 1k resister to bridge pins. Good luck!
Overview Server-PSUs:
======================
https://www.rcgroups.com/forums/showthr ... r-Supplies
general procedure to find PSon and PSkill:
==============================================
https://www.rcgroups.com/forums/showthr ... r-Supplies
https://www.rcgroups.com/forums/showpost.php?
I had some success with the procedures described here. You can measure resistance between ground and each PIN on the backside and conclude its possible function. Its still guessing so you must be cautious and use at least 500 ohm or 1k resister to bridge pins. Good luck!
-
- Beiträge: 15
- Registriert: Di 23. Jul 2024, 18:22
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 2 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
Hi,
So i measured all pin resistance aganist GND and then power PSU on and measure each pin voltage aganist ground
Its seems there are mostly 3,5V logic and one pin 12V which can be +12Vstby
Should i try now method testing with 1k resistor? problem is that i dont know from which pin i should take 3,5V for testing
So i measured all pin resistance aganist GND and then power PSU on and measure each pin voltage aganist ground
Its seems there are mostly 3,5V logic and one pin 12V which can be +12Vstby
Should i try now method testing with 1k resistor? problem is that i dont know from which pin i should take 3,5V for testing
-
- Beiträge: 15
- Registriert: Di 23. Jul 2024, 18:22
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 2 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
I can first try 3,5V pin pulling down by 1K to GND and then reverse pulling UP 0V by 1k to some 3,5V pin (supply?)
-
- Beiträge: 15
- Registriert: Di 23. Jul 2024, 18:22
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 2 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
Yeeeeees
guys i did it !!!!
So i follow instructions and i excluded every 0V pin and connected 470R resistor to GND and i was able to find exact pin which turn PSU to the standby mode.
After turning on switch on front panel PSU (50V will turn on)
So i make it (to my surprise very fast)
Thank you guys all of you a lot.
![Very Happy :D](images/smilies/ugly_d.gif.pagespeed.ce.FMB1HCwuUF.gif)
So i follow instructions and i excluded every 0V pin and connected 470R resistor to GND and i was able to find exact pin which turn PSU to the standby mode.
After turning on switch on front panel PSU (50V will turn on)
So i make it (to my surprise very fast)
Thank you guys all of you a lot.
-
- Beiträge: 3290
- Registriert: Di 30. Jun 2015, 20:45
- Spezialgebiet: Informatik
- Wohnort: Nähe Heidelberg
- Hat sich bedankt: 379 Mal
- Danksagung erhalten: 221 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
Congrats for your success - glad we could help here.
Typically its a pin with 1 - 10k resistance to gnd that you have to bridge.
Now you can try adjusting the output voltage - but this is much more difficult in most cases.
Typically its a pin with 1 - 10k resistance to gnd that you have to bridge.
Now you can try adjusting the output voltage - but this is much more difficult in most cases.
-
- Beiträge: 15
- Registriert: Di 23. Jul 2024, 18:22
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 2 Mal
Re: Startup of server PSU "N7K-AC-6.0KW"
Yes, thanks all of you..
I suppose there will be some IC or O-AMP with feedback with resistor divider which i would need to change to fool PSU to think there is still good voltage at the output
. But there can be problem with that, there are two supplies somehow matched so they could give same current to the load (some current sharing).
Sometime i will definetly look at that, now am glad that PSU works![Very Happy :D](images/smilies/ugly_d.gif.pagespeed.ce.FMB1HCwuUF.gif)
I suppose there will be some IC or O-AMP with feedback with resistor divider which i would need to change to fool PSU to think there is still good voltage at the output
![Very Happy :D](images/smilies/ugly_d.gif.pagespeed.ce.FMB1HCwuUF.gif)
Sometime i will definetly look at that, now am glad that PSU works
![Very Happy :D](images/smilies/ugly_d.gif.pagespeed.ce.FMB1HCwuUF.gif)
-
- Beiträge: 2927
- Registriert: Fr 7. Apr 2006, 14:05
- Spezialgebiet: Physik,Elektronik,Blender
- Schule/Uni/Arbeit: M.Sc ET, Hardwareentwickler
- Wohnort: 65366 Geisenheim (Hessen)
- Hat sich bedankt: 1 Mal
- Danksagung erhalten: 88 Mal
- Kontaktdaten:
Re: Startup of server PSU "N7K-AC-6.0KW"
für my 48V PSUs i found the 2.5V reference and made that adjustable, that safer since it does not change the gain of the feedback loop and you can regulate down to 0V if you find and disable the undervoltage shutdownGady159 hat geschrieben: ↑Do 25. Jul 2024, 20:11 Yes, thanks all of you..
I suppose there will be some IC or O-AMP with feedback with resistor divider which i would need to change to fool PSU to think there is still good voltage at the output. But there can be problem with that, there are two supplies somehow matched so they could give same current to the load (some current sharing).
Sometime i will definetly look at that, now am glad that PSU works![]()